2014 DEERE 744K for sale in Doniphan, NE

Machine runs and operates, but has a few areas that need attention. Machine was being used to feed so wasn't given much time to inspect.| Wheel Loaders Integrated Toolcarriers Manufacturer Deere Model 744K Serial # 1DW744KJED663338 Year 2014 SMU/Hrs 5152 | Wheel Loaders Integrated Toolcarriers Configuration EROPS Yes Ride Control Yes Steer, S.T.I.C. Yes Diff Lock / Unlock Yes Auto Shift Yes Engine Enclosures Yes Lighting System Yes Standard Lift Yes | General Appearance Radiator Grill and Shroud Fair   Comments: Left side hardnose panel is bent and won't allow left cooler door to close. Eng. Enclose Hood and Stack Good Fenders Fair   Comments: Both front fenders are torn. Fuel Tank Good Crankcase Guard and Battery Box Good Front Frame Good Rear Frame Good Differential Supports Good Counterweight Good Pre-Cleaner Bowl Good Cab or Canopy Good Steps or Ladder Fair   Comments: Both rear steps are bent. Grab Irons Good Paint Poor   Comments: Paint is scratched and scuffed and decals are gone. Sheet Metal Good S.O.S. Taken No Cleaning Required Yes   Comments: Machine needs washed and cleaned. | Safety Items Safety Decals in Place Yes Safety Decals Legible Yes ROPS Yes Horn Good | Gauges / Operator Station / Console Dash Console Good Meter Good Gauges Good Switches Good Windshield Wipers Fair   Comments: Front wiper is inop. Heater Good Air Conditioner Good Interior Lights Good Seat Cushion and Arm Rest Good Floor Boards Good EMS Panel and Warnings Good Door Latches Good CMS Panel Good Doors Good Pans and Guards Good Windows Good Glass and Mirrors Good Seat Belt Good Current Parts Manual Not Applicable Current Safety Manual Yes Current O&MM Yes ROPS Certification Plate Yes Back Up Alarm Yes Sound Proofing Yes | Engine Oil Leaks No Blow By No Knocking No Compression in Radiator No Water in Oil No Fluid Levels OK? Yes Anti-Freeze Color Green Oil Pressure (H/L/N) Normal Smoke (B/D/L/W) Normal Turbocharger or Blower Good Governor Good Engine Supports Good Air Cleaners Fair   Comments: Dusty Exhaust and Muffler Good Belts and Pulleys Good Notes Engine seemed to operate properly. | Cooling System Radiator Good Coolers Good Hoses Good Water Pump Good Fan Good Fan Drive Good Notes Coolers could stand to be blown out. | Electrical / Starting / Charging System Batteries and Cables Good Starter Good Alternator Good Wiring Good Lighting Good Ether Aid Yes | Transmission Case Good Seals Good Torque Converter Good Universal Joints Good Temp and Pressure Gauges Good Drive Shaft Good Oil Filter Condition CUT Not Applicable Cooler Good Pump Good Operating Condition Good Transmission Reverse Shifts Good Transmission Forward Shifts Good Transmission - Noisy No Notes Transmission seemed to shift properly. | Steering Steering Linkage Good Articulate P and B Good Steering Cylinder Good Pumps Good Hand Metering Unit Good Steering Wheel Tilt and Extend Good Lines and Fittings Good Valves Good | Brake Type Wet or Dry Good   Comments: Wet Control Valve Good Lines Good Brake Linkage Good Pedal Good Parking Brake Good Hydraulic Pumps Good Accumulators Good Holds in Park Yes Holding What Gear? 2nd | Hydraulics Overall Operating Condition Good Tank Good Pumps and Valves Good Hose Lines Good Control Linkage Good Bucket and Hoist Kickout Good Lift Cylinders Good Bucket Cylinder Good Accumulator Charge Ride Control Good | Bucket Cutting Edges Fair   Comments: Edge is worn in on right corner. Bucket Bottom Fair   Comments: Bottom skids are worn through. Bucket Sides Good Bucket Linkage Good Loader Pins and Bushings Good Loader Frame Good Notes Customer stated that machine may not be traded with bucket that is on it. Bucket Capacity 7 CYD | Final Drives Wheel Lugs and Rims Good Front Axle Good Rear Axle Good Oscillation Good Trunion Good Differentials Good Leaks No | Tires Right-Front - Make-Serial# Michelin Right-Front - Tread Depth in 1/32in 28/32 Right-Front - Recapped Yes Right-Front - Tread Cuts-Chunks No Right-Front - Side Cuts Section No Right-Rear - Make-Serial# Michelin Right-Rear - Tread Depth in 1/32in 32/32 Right-Rear - Recapped Yes Right-Rear - Tread Cuts-Chunks No Right-Rear - Side Cuts Section No Left-Front - Make-Serial# Michelin Left-Front - Tread Depth in 1/32in 28/32 Left-Front - Recapped Yes Left-Front - Tread Cuts-Chunks No Left-Front - Side Cuts Section No Left-Rear - Make-Serial# Michelin Left-Rear - Tread Depth in 1/32in 28/32 Left-Rear - Recapped Yes Left-Rear - Tread Cuts-Chunks No Left-Rear - Side Cuts Section No Tire Size 26.5R25


Demag AC160-2 -

Demag AC160-2 -

Syracuse, NY
Posted on: October 19
Additional Information Main boom 210' with quick disconnect system, 30'-56' swing-away jib, - Main boom 210' with quick disconnect system - 30'-56' swing-away jib - 52' main boom extension (2x26') - 5 axle crane carrier - Drive & Steer 10x8x8 - 5 sheave block - 1 sheave block - quick disconnect for outriggers - CWT 119,500LB - dolly preparation - air conditioning - rooster sheave + 2nd boom head ...

Demag AC200-1 -

Demag AC200-1 -

Syracuse, NY
Posted on: October 19
Additional Information COMING SOON!! Worldwide Engine, 41'-223' Boom, 30'-56' Jib, Single Line Hook, 3 blocks - Worldwide Engine - 41'-223' Boom - 30'-56' Jib - Single Line Hook - 3 blocks - Telescopic boom HA: 41-223' (12,5m- 67,8m) - rooster sheave - HAV17: Double folding swing-away jib 30'-56' (9m/17m) manual offset 20 degree/40 degree 1-sheaved head, Incl. transport storage - VA16: 8m/16m...

Demag AC250-1 -

Demag AC250-1 -

Syracuse, NY
Posted on: October 19
Additional Information 48'-262' Main Boom, 32'-65' Hydraulic offsettable Jib, 26'-52' Telescopic boom extension, - 48'-262' Main Boom - 32'-65' Hydraulic offsettable Jib - 26'-52' Telescopic boom extension - 213,000 lbs of counterweight -125ton-5 sheave hook block - 80 ton- 3 sheave hook block - single line hook - Dolly Preparation, with automatic rigging system - Innovative Demag IC-1 crane con...

Demag AC350-6 -

Demag AC350-6 -

Syracuse, NY
Posted on: October 19
Additional Information 210' 6 section Main Boom, Drive/Steering 12 x 8 x 10, automated rear axle steering system. CRANE CARRIER: - 210' 6 section Main Boom - Drive/Steering 12 x 8 x 10 - automated rear axle steering system - 4 telescopic outriggers with automatic leveling - Automatic centralized lubrication - 8 cylinder DaimlerChrysler OM 502 LA - 612 HP Tier 3 diesel engine - ZF AS-Tronic incl...

Demag AC40-1 -

Demag AC40-1 -

Syracuse, NY
Posted on: October 19
Additional Information 3-axle CITY CRANE, Drive & Steer 6x4x6, Main boom 102' - 3-axle CITY CRANE - Drive & Steer 6x4x6 - Main boom 102' - Boom head traverse cpl.: Searcher hook, incl.shackle and hook - HAV13: 7,1/ 13,0m, Double folding swing-away jib, manual offset 30°, 1-sheaved head, Incl. transport storage, Includes HAV7 - Counterweight rigging device - Cast counterweight 3-pieces - Hook bl...

Don't Be a Victim of Fraud

  • Electronic Scams
  • Home-based jobs
  • Fake Rentals
  • Bad Buyers
  • Non-Existent Merchandise
  • Secondhand Items
  • More...

Don't Be Fooled

  • When selling, do not put your home address in your ad.
  • To avoid scams, buy and sell with people you can meet locally, in person.
  • When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
  • Never give out financial or private information like account numbers, PayPal login, or social security number.
  • If an offer sounds too good to be true, it is. Walk away!

More Listings

2013 DEERE 744K
Gering, NE
2014 DEERE 320E
Elkhorn, NE
2014 DEERE 333E
Wahoo, NE
2014 DEERE 624K
Gering, NE
2014 DEERE 320E
Gering, NE